Industrial Hot Dip Galvanizing Equipment Furnace Zinc Kettle Pot
Tank For Hot Dip Galvanizing Line Equipment
Zinc Kettle Production Process
- Cutting raw material
- Annealing treatment
- Steel sheet forming
- Integrated end
- U shape in the middle
- Assembly and welding
- Ultrasonic flaw detection
Zinc Kettle Quality Assurance
1 | Product Certification | Mill Test Certificate Ultrasonic Testing Report |
2 | Zinc Kettle Use Instructions | "heating curve" Precautions for use How to maintain |
3 | Service Life | Generally 3-8years under correct use and maintenance |
Advantages
- C content is low, the iron loss is small；
- Good welding performance, and high elongation rate.
- Mn’s content is slightly higher to increase the strength of the
steel plate.
- Si and P are low, with good corrosion-resistant performance.
- Steel plates are XG-08 Anshan Steel, uniform microstructures.
Main chemical composition
| Item(%) | C | Si | Mn | P | S |
| XG-08 | 0.06~0.11 | ≦0.03 | 0.03~0.65 | ≦0.025 | ≦0.015 |
Customized zinc kettle
- Kettle size: It is designed according to the type and output of the workpiece,
or the customer provides the design drawing.
- Kettle thickness: 50mm or 60mm. The biggest difference is that the service life of
60mm is over one year longer than that of 50mm.
- Kettle shape: Round bottom, round corner or customized.
- Protection shields: Prevent flame from directly heating the zinc kettle, prolonging
its service life.
- Material quality: XG-08, Angang zinc kettle special plate, provide steel plate
quality certificate. It is the most widely used steel for
galvanizing kettles its quality is as good as Germany Pilling.
Zinc kettle quality
-provide product quality certificate, UT test report. 100%
ultrasonic flaw detection of welds, and delivery only after passing
the inspection. The welding standard shall be in accordance with GB
11345-2013 and relevant manufacturing standards.
Paying method
- 50% T/T down payment
- 50% T/T before shipment
Business Scope
- The design, manufacture, installation, commissioning, and training
of the hot dip galvanizing lines.
- And the improvement of old galvanizing plants.
Contact Us
If that product interest you, please contact us.
Meanwhile, please tell us the following information.
Materials to be galvanized
Biggest dimension or kettle size
Maximum weight
Maximum capacity per year
Power source
Fuel
